Terug naar Carrières

Maintenance Planner

Functiegebied:
Publicatie datum:
Einddatum:
ID:
2507036681W
Solliciteer nu

Deel deze vacature:

Kenvue is momenteel op zoek naar een:

Maintenance Planner

Wat we doen

Bij Kenvue realiseren we de buitengewone kracht van dagelijkse verzorging. Gebouwd op meer dan een eeuw erfgoed en geworteld in de wetenschap, zijn we het huis van iconische merken - waaronder NEUTROGENA®, AVEENO®, TYLENOL®, LISTERINE®, JOHNSON'S® en BAND-AID® die je al kent en waar je van houdt. Wetenschap is onze passie; Zorg is ons talent.

Wie we zijn

Ons wereldwijde team bestaat uit ~ 22.000 briljante mensen met een werkcultuur waar elke stem telt en elke bijdrage wordt gewaardeerd. We zijn gepassioneerd door inzichten, innovatie en toegewijd aan het leveren van de beste producten aan onze klanten. Met expertise en empathie betekent een Kenvuer zijn dat je elke dag de kracht hebt om miljoenen mensen te beïnvloeden. We stellen mensen op de eerste plaats, geven er veel om, verdienen vertrouwen met de wetenschap en lossen op met moed - en hebben schitterende kansen voor je klaarliggen! Geef samen met ons vorm aan onze toekomst - en die van jou. Klik voor meer informatie op here.

Rol rapporteert aan:

Maintenance Lead

Locatie:

Europe/Middle East/Africa, South Africa, Gauteng, Johannesburg

Werklocatie:

Volledig ter plaatse

Wat je gaat doen

Broad Purpose / Function:

Lead and drive Excellence in Maintenance to support the Site Operations through practical and effective application of maintenance philosophy.  Driving innovative and cost-effective solutions to ensure best practices and compliance requirements are met to deliver high asset reliability.

Responsible for Planning and development of effective Planned Maintenance / co-ordinating and tracking the timeous completion of all Planned Maintenance schedules.  Responsible for acting upon any deviation or areas of concern arising from PM Inspections.

Duties / Responsibilities:

Planned Maintenance (PM)

  • Responsible for the effective control of the Computerized Maintenance Management System (CMMS) and all engineering maintenance documentation.

  • Capture of assets for new machinery & equipment on MAXIMO System

  • Develop new PM schedules for all plant machinery & equipment.

  • Update PM Schedules with content and frequency.

  • Generate PM Schedules as well as Calibration Schedules

  • Co-ordinates the completion of PM Schedules.

  • Responsible for ensuring that all PM Schedule feedback is captured on CMMS (MAXIMO) and ensures the integrity of the system.

  • Guides efforts to ensure reliability and maintainability of equipment, processes, controls, and safety systems.

  • Systematically defines, designs, develops, monitors, and refines an Asset Maintenance Plan that includes:

  • Value-added preventive maintenance tasks

  • Reviewing of maintenance tasks and data cleansing within the CMMS system

  • Analyzing breakdowns and implementing permanent solution

  • Completion of RCPS with the technical teams

  • Effective utilization of predictive and other non-destructive testing methodologies designed to identify and isolate inherent reliability problems

  • Works closely with the Reliability Engineer to Monitor / Tracks and Develop engineering solutions for repetitive failures and issues that adversely affect manufacturing and packing operations. These include machine safety, efficiency, reliability, capacity, quality, cost, or regulatory compliance issues.

  • Data analysis techniques that can include:

  • Root-cause problem solving RCPS

  • Failure mode affective analysis FMECA

  • Failure Reporting, Analysis and Corrective Action System (FRACAS)

  • Works with Operations to perform analyses of assets including:

  • Asset Utilization

  • Overall Equipment Effectiveness

  • Life cycle of the asset

  • Provides technical support to operations, maintenance management, facilities and technical personnel.

  • Ensure adequate spares for planned maintenance activities and compile maintenance spare kit.

  • Applies value analysis to repair/replace, repair/re-design, and make/buy decisions.

  • Provide monthly maintenance reports and highlight deviations

  • Actively participates in the identification and implementation of continuous improvements initiatives.  Ensure wastages are minimized and Maintenance costs contained or improved.

Ad hoc Jobs

  • Responsible for raising job cards in MAXIMO System.

  • Improve spares & inventory management through CMMS

Breakdown Jobs

  • Responsible for loading breakdown job cards in MAXIMO System.

Compliance

  • Assists with ensuring that the Safety, Health and Environment aspects of the Technical Operations function is in compliance with:

  • OHSAct & Regulations

  • Kenvue Safety Policy

  • Kenvue Worldwide Safety and Health Standards

  • Applicable Safety Health and Environmental regulatory requirements.

  • Assists with ensuring compliance with quality standards and GMP regulations on all technical operations activities.

  • Assists with ensuring that Maintenance Operations SOP’s and Work Instructions are updated and accurate

  • Assists with ensuring Quality compliance – Kenvue corporate and local procedures.

General

  • Supports and assists with any work/activity that may be scheduled or unscheduled as instructed by Engineering Management and in doing so ensuring corporate and local compliance requirements are met.

  • Ensures that time keeping is accurately maintained and is a true reflection of actual work done.

  • Support Validation process with IQ, OQ and PQ tasks as assigned.

  • Contributes to the reduction of NCs (Non-Conformances), deviations and complaints.

  • Ensure the integrity of the data captured in the CMMS is accurate and updated monthly

  • Guarantee the order and cleanliness maintenance in responsibility.

  • Ensures compliance with the internal site requirements as well as HR policies and procedures. E.g. working hours, personal hygiene, etc.

  • Conducts internal EHS/Quality /Housekeeping audits and ensures corrective action plans are initiated and closed out for area of responsibility

Qualifications / Experience / Requirements:

  • Bachelor’s degree in engineering (preferably Industrial)

  • 0 - 2 years Maintenance or Engineering

  • Strong communication and interpersonal skills

  • Strong numeracy and PC skills

  • Demonstrated ability with Systems

  • Attention to detail

  • Ability to work independently

  • Customer service orientated

  • Assertiveness

  • Administration and Document Control

  • Must be systematic, neat, methodical and have attention to detail

  • Leadership

  • Interpersonal skills: Active listening, provides constructive feedback, team player, communication skills

  • Deadline and target driven approach and behavior

  • Encourages input from the team on decisions – collaboration

  • User knowledge of Microsoft Office and CMMS.

Als u een persoon met een handicap bent, kijk dan op onze pagina Hulp bij handicap voor informatie over het aanvragen van een accommodatie.